Maintenance
Mercury QuikVac
6
May 09
Changing the Pump Filter
Occasionally inspect the pump filter and change if it contains an accumulation of debris.
1. Remove the reservoir bottle from its platform and place on a work table.
2. Pull the tubing from the barb on the cap of the reservoir bottle.
3. Grasp the sides of the filter and pull from the top of the cap. Be careful not to splash any
contents that may be in the filter.
4. Dispose of the old filter and replace with a new one.
5. Reattach the tubing to the barb on the top of the cap.
6. Place the reservoir bottle back onto its platform.