5 T
ROUBLESHOOTING AND
M
AINTENANCE
The instrument requires very little maintenance to remain in top operating condition. The gas flow
tubes should be wiped clean after each use and inspected weekly to ensure that they do not
become clogged.
Improper handling, disposing of, or transporting potentially hazardous materials can
cause serious bodily harm or damage the instrument. Always refer to the MSDS when
handling hazardous materials. Safe operation and handling of the instrument,
supplies, and accessories is the responsibility of the operator.
Do not modify this instrument without the authorization of a Micromeritics service per-
sonnel.
When lifting or relocating the instrument, use proper lifting and transporting devices for
heavy instruments. Ensure that sufficient personnel are available to assist in moving
the instrument. The VacPrep weighs approximately 10 kg (22 lb).
Use of a power cord or power supply not provided with the instrument could cause
personal injury or damage to the equipment. If a replacement is needed, contact your
Micromeritics Service Representative. Detachable power supply cords with an inad-
equate rating could cause significant instrument damage or physical harm.Do not add
anything between the power cord and the power source that would compromise the
earth ground. Do not remove or disable the grounding prong on the instrument power
cord.If the equipment needs to be relocated, check with your Micromeritics service
representative. The equipment must be position such that the mains supply is not
obstructed and is easily accessible to disconnect the equipment from the AC main
power supply.
5 Troubleshooting and Maintenance
VacPrep Operator Manual
061-42802-01 (Rev B) — Apr 2021
5 - 1
