G
ENERAL
S
AFETY
Do not modify this instrument without the authorization of a Micromeritics service per-
sonnel.
Use caution in the areas where this symbol is displayed on the instrument — such as
near the heating stations. These surfaces may be hot and could cause serious burns.
Use the gloves supplied in the accessories kit.
Any piece of laboratory equipment can become dangerous to personnel when improperly
operated or poorly maintained. All employees operating and maintaining Micromeritics
instruments should be familiar with its operation and should be thoroughly trained and instructed
on safety.
n
Read the manual for any special operational instructions for the instrument.
n
Know how the instrument functions and understand the operating processes.
n
Wear the appropriate personal protective equipment when operating this instru-
ment — such as eye protection, lab coat, protective gloves, etc.
n
When lifting or relocating the instrument, use proper lifting and transporting devices
for heavy instruments. Ensure that sufficient personnel are available to assist in
moving the instrument. The VacPrep weighs approximately 10 kg (22 lb).
n
Always pay attention to the safety instructions provided on each label affixed to the
instrument and do not alter or remove the labels. When inspecting the instrument,
ensure that the safety labels have not become worn or damaged.
n
Proper maintenance is critical to personnel safety and smooth instrument operation
and performance. Instruments require regular maintenance to help promote safety,
provide an optimum end test result, and to prevent costly down time. Failure to prac-
tice proper maintenance procedures can lead to unsafe conditions and shorten the
life of the instrument.
n
Improper handling, disposing of, or transporting potentially hazardous materials
can cause serious bodily harm or damage the instrument. Always refer to the
MSDS when handling hazardous materials. Safe operation and handling of the
instrument, supplies, and accessories is the responsibility of the operator.
General Safety
VacPrep Operator Manual
061-42802-01 (Rev B) — Apr 2021
vi
