General Safety
I
NTENDED
U
SE
The VacPrep 061 degasser prepares samples for adsorption analysis. Moisture and other
contaminants are removed by heating the sample.The degasser has six heating stations for
degassing samples and six cooling stations. The required degassing temperature is set and
checked at the temperature controller. Control valves provide a constant indication of the valve
state. A built-in vacuum gauge provides a constant indication of the system vacuum.
The instrument is intended to be operated by trained personnel familiar with the
proper operation of the equipment recommended by the manufacturer as well as
relevant hazards involved and prevention methods. All use, other than that described
in this manual, is seen as unintended use and can cause a safety hazard.
The instrument is intended to be used as per applicable local and national regulations.
vii
VacPrep Operator Manual
061-42802-01 (Rev B) — Apr 2021
