Long Gage Strain Sensor |
os3610
C o p y r i g h t © 2 0 1 2 M i c r o n O p t i c s , I n c .
o s 3 6 1 0 I n s t a l l a t i o n G u i d e , R e v i s i o n A
13
In addition to the sensor itself, the connector or splice on the end of the sensor cable also needs
to be protected from the elements. If the cable end is not protected, the cable could become a
path for moisture to enter the sensor. One method of protecting sensors supplied with FC/APC
connectors is to use the Universal Connector Protection Fitting “PF” Kit from Micron Optics.
The Kit shown in Figure 18 contains everything needed to protect an FC/APC connection.
Figure 18
– Universal Connector Protection Fitting
