Parameter description:
y
Rx Packets:
The counting number of the packet received.
y
Rx Octets:
Total received bytes.
y
Rx Errors:
Number of bad packets received.
y
Rx Unicast Packets:
Show the counting number of the received unicast packet.
y
Rx Broadcast Packets:
Show the counting number of the received broadcast packet.
y
Rx Multicast Packets:
Show the counting number of the received multicast packet.
y
Rx Pause Packets:
Show the counting number of the received pause packet.
y
Tx Collisions:
Number of collisions transmitting frames experienced.
y
Tx Single Collision:
Number of frames transmitted that experienced exactly one collision.
y
Tx Multiple Collision:
Number of frames transmitted that experienced more than one collision.
y
Tx Drop Packets:
Number of frames dropped due to excessive collision, late collision, or frame aging.
y
Tx Deferred Transmit:
Number of frames delayed to transmission due to the medium is busy.
y
Tx Late Collision:
Number of times that a collision is detected later than 512 bit-times into the
transmission of a frame.
y
Tx Excessive Collision:
Number of frames that are not transmitted because the frame experienced
16 transmission
attempts
.
y
Packets 64 Octets:
Number of 64-byte frames in good and bad packets received.
y
Packets 65-127 Octets:
Number of 65 ~ 127-byte frames in good and bad packets received.
y
Packets 128-255 Octets:
Number of 128 ~ 255-byte frames in good and bad packets received.
y
Packets 256-511 Octets:
Number of 256 ~ 511-byte frames in good and bad packets received.
y
Packets 512-1023 Octets:
Number of 512 ~ 1023-byte frames in good and bad packets received.
y
Packets 1024- 1522 Octets:
Number of 1024-1522-byte frames in good and bad packets received.
y
Tx Packets:
The counting number of the packet transmitted.
y
TX Octets:
Total transmitted bytes.
y
Tx Unicast Packets:
Show the counting number of the transmitted unicast packet.
y
Tx Broadcast Packets:
y
Show the counting number of the transmitted broadcast packet.
y
Tx Multicast Packets:
Show the counting number of the transmitted multicast packet.
y
Tx Pause Packets:
Show the counting number of the transmitted pause packet.
y
Rx FCS Errors:
Number of bad FSC packets received.
y
Rx Alignment Errors:
Number of Alignment errors packets received.
y
Rx Fragments:
Number of short frames (< 64 bytes) with invalid CRC.
y
Rx Jabbers:
Number of long frames(according tomax_length register) with invalid CRC.
y
Rx Drop Packets:
Frames dropped due to the lack of receiving buffer.
y
Rx Undersize Packets:
Number of short frames (<64 Bytes) with valid CRC.
y
Rx Oversize Packets:
Number of long frames(according to max_length register) with valid CRC.
y
3.5 PoE
3.5.1
PoE Status
Display the information about the PoE status.
21
