y
VLAN Name:
The name defined by administrator is associated with a VLAN group. Valid letters are A-Z, a-z, 0-9, “ -
“ and “_” characters. The maximal length is 15 characters.
y
VID:
VLAN identifier. Each tag-based VLAN group has a unique VID. It appears only in tag-based and
Double-tag mode.
y
Member:
This is used to enable or disable if a port is a member of the new added VLAN, “Enable” means it is a
member of the VLAN. Just tick the check box beside the port x to enable it.
y
Untag:
Select “untag” on the specified ports. Tag will be removed when packet is transmitted out of the ports.
3.9.3 PVID
In PVID Setting, user can input VID number to each port. The range of VID number is from 1 to 4094. User
also can choose ingress filtering rule (Rule 2) to each port. The Ingress Filtering Rule 2 is “drop untagged
frame”. While Rule 2 is enabled, the port will discard all Untagged-frames.
Parameter description:
y
PVID:
This PVID range will be 1-4094. Before you set a number x as PVID, you have to create a Tag-based
VLAN with VID x. For example, if port x receives an untagged packet, the switch will apply the PVID
(assume as VID y) of port x to tag this packet, the packet then will be forwarded as the tagged packet
with VID y.
y
Default Priority:
28
