78
(5) Flash & Call waiting
/VoIP Setup/Advance Setup/Flash & Call waiting
On this page, user can define the parameters relative to the FLASH key and Call Waiting
function. These functions usually work with PBX
z
Token for flash key on VoIP(!):
Define the token for flash key during VoIP protocol ( use “! “ by default).
z
Flash Signal generate length :
Define the pause time (ms) for one “,” symbol at
/Routing Setting/VoIP Call Out/
.
This pause till is useful for PBX seize the trunk line from extension line. The default
time is 1000ms, Input range from 100 to 3000ms.
z
Flash Signal Detect Threshold:
Define the threshold for valid FLASH signal. Only the flash time length between
setting between min. to max. is accept by the gateway.
z
Call waiting from PSTN when VoIP talking:
Enable/Disable the Call Waiting function from PSTN line when talking by VoIP.
z
Call waiting from VoIP when PSTN talking:
Enable/Disable the Call Waiting function from VoIP when talking by PSTN line.