4-3
Running the Setup Procedure
The M4Pi system board has four primary CMOS configuration screens: the
Main Screen (Figure 4-2), the Advanced Screen (Figure 4-8), the Security
Screen (Figure 4-10), and the Exit Screen (Figure 4-12). To toggle between
the screens, press the right arrow <
→
> and the left arrow <
←
> keys.
Setting the Main Screen
The CMOS Main Screen (Figure 4-2) is used to set the time and date, to set
the floppy drive types, to configure the hard disks, and to configure the video.
This section explains how to configure each of these categories. To move
between the categories, use the up arrow <
↑
> and the down arrow <
↓
>.
Figure 4-2 CMOS Main Screen
System Time and Date
To set the time, use the <-> key to decrease the number and the <+> key to
increase the number. To move the prompt forward, use the <Tab> key; to
move the prompt backward, use the <Shift-Tab> key. To set the date, use the
The BIOS Setup Utility
