W6-LI System Board Manual
Configuring the W6-LI
Although the W6-LI system board is packaged in protec-
tive materials, it is important to use care while unpack-
ing and setting up.
Static Electricity
The W6-LI is shipped from the factory in an antistatic
bag. To reduce the possibility of damage, it is important
to neutralize any accumulated static charges on your
body before handling the board. The best way to do this
is to ground yourself using a special wrist or ankle strap.
If you do not have a strap, you should touch both of your
hands to a safely grounded object. After you have
grounded yourself, ground the W6-LI via the solder pads
surrounding one of its mounting holes.
Once the W6-LI is removed from its packaging, place it
on top of the antistatic bag. Carefully inspect the board
for damage which may have occurred during shipment.
Environment Considerations
Make sure the finished computer system is in an area with
good ventilation. The system should not be in direct
sunlight, near heaters, or exposed to moisture, dust or
dirt.
11
Chapter 2: Configuring the W6-LI
2
Chapter
