Default setting of the MHz display, type 1 = S-802
S-802 Turbo Switch
Default setting of the MHz display, type 2 = SK-888
Setting up the MHz display
You can set up the MHz display as you like before installing the drives and
the 3.5" drive cage. You have exactly to set up the jumper configuration to
get the right display for each segment of the display. The system of the
setting is shown at the drawing above. For each segment you have to
determine one of three possible jumper positions and define whether the
segment is always off, only on at "Normal" position, only on at "Turbo"
position or whether it is always off.
9
