2014/03/13 09:47
5/8
WizFi250 Quick Start Guide
- http://wizwiki.net/wiki/
2. Connect to WizFi250’s SSID …by inputting default password (123456789) and WizFi250’s IP
●
address or URL (wizfi250.wiznet.com) in your web browser. After that input the user id and user
password. ( Default ID : admin, Default Password : admin )
3. If you select “S2W Setting & Scan Network” menu, …the web page will be shown as below.
●
If WizFi250 is set successfully, it shows the success message … as in the following picture on the
right.
If you select <Next_Step> button, you can move to next page.
WizFi250 TCP/IP Settings guide
Modes
AP or Station (connect to AP)
Protocol
TCP/UDP (Server / Client)
Remote IP Connecting device's IP address
Remote Port Connecting device's Port
Local Port Module's Port
