50200198-2/4.16
Microsemi Corporate
Headquarters
One Enterprise, Aliso Viejo,
CA 92656 USA
Within the USA: +1 (800) 713-4113
Outside the USA: +1 (949) 380-6100
Sales: +1 (949) 380-6136
Fax: +1 (949) 215-4996
E-mail:
Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor
and system solutions for communications, defense and security, aerospace, and industrial
markets. Products include high-performance and radiation-hardened analog mixed-signal
integrated circuits, FPGAs, SoCs, and ASICs; power management products; timing and
synchronization devices and precise time solutions; voice processing devices; RF solutions;
discrete components; enterprise storage and communications solutions, security technologies,
and scalable anti-tamper products; Ethernet solutions; Power-over-Ethernet ICs and midspans;
custom design capabilities and services. Microsemi is headquartered in Aliso Viejo, California,
and has approximately 4,800 employees worldwide. Learn more at
.
© 2016 Microsemi Corporation. All
rights reserved. Microsemi and the
Microsemi logo are trademarks of
Microsemi Corporation. All other
trademarks and service marks are the
property of their respective owners.
Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or
the suitability of its products and services for any particular purpose, nor does Microsemi assume any
liability whatsoever arising out of the application or use of any product or circuit. The products sold
hereunder and any other products sold by Microsemi have been subject to limited testing and should not
be used in conjunction with mission-critical equipment or applications. Any performance specifications are
believed to be reliable but are not verified, and Buyer must conduct and complete all performance and
other testing of the products, alone and together with, or installed in, any end-products. Buyer shall not rely
on any data and performance specifications or parameters provided by Microsemi. It is the Buyer's
responsibility to independently determine suitability of any products and to test and verify the same. The
information provided by Microsemi hereunder is provided “as is, where is” and with all faults, and the entire
risk associated with such information is entirely with the Buyer. Microsemi does not grant, explicitly or
implicitly, to any party any patent rights, licenses, or any other IP rights, whether with regard to such
information itself or anything described by such information. Information provided in this document is
proprietary to Microsemi, and Microsemi reserves the right to make any changes to the information in this
document or to any products and services at any time without notice.
Common Issues
If the On LED does not light up after FlashPro4 driver installation, the driver might not be installed correctly and you
must troubleshoot the installation. For more information, refer to the
FlashPro Software and Hardware Installation
and the “Known Issues and Workarounds” section of the FlashPro software release notes:
http://www.microsemi.com/products/fpga-soc/design-resources/programming/flashpro#software
.
FlashPro4 may not operate correctly if pin 4 of the JTAG connector is improperly used. See the note information on
page 1.
Documentation Resources
Refer to the FlashPro software page for further information:
http://www.microsemi.com/products/fpga-soc/design-resources/programming/flashpro#documents
Technical Support and Contacts
Technical support is available online at
and by email at
.
Microsemi SoC Sales offices, including Representatives and Distributors, are located worldwide. To find your local
representative visit
