GBE Switch Module 1x 10/100/1000Base-T 7x 10/100Base-TX, 2x SFP
Page 2/8
MICROSENS
GmbH & Co. KG - Kueferstr. 16 - D-59067 Hamm / Germany - Tel. +49 (0)2381/9452-0 - Fax -100 - www.microsens.com
Technical Specifications
Typ
Manageable Gigabit Ethernet Switch module with 2 x SFP
slots, 1x 10/100/1000Base-T and 7x 10/100Base-TX ports for
fault tolerant fiber rings
Fiber type (SFP based)
Multimode 62,5/125 or 50/125µm,
Single mode 9/125µm, duplex (optional)
Cable type
Shielded Twisted Pair Kabel, 100 Ohm, Categorie 5,
Pinout RJ45 port auto crossover
Data rate
10, 100 and 1000 Mbps
LED displays
Power
ready for operation
Lnk/Act
Link status/Data traffic each Port
Ring
Switch is configured into ring mode
RM
Switch is ring master
Alarm
Fiber uplink interrupted, ring failure or
power supply failure
Power Supply
Standard:
18...36 V DC via backplane
Optional:
36...72 V DC via backplane for PoE Option
Fuse
1 A, slow (internal)
Power consumption
8 Watt (typ.)
Dimensions
50 x 108 x 116 mm (w x d x h)
Operationg temp.
-20°C to 60°C
Storage temp.
-20°C to 80°C
Rel. humidity
5% to 90% non condensing
Management
- Configuration with PC based management tool
(not included)
- Support of SNMP-Traps, TELNET, HTTP
Ring function
Suitable for master and slave mode, no limitation in number
of ring node, no max. delay
