GBE Switch Module 1x 10/100/1000Base-T 7x 10/100Base-TX, 2x SFP
Page 3/8
MICROSENS
GmbH & Co. KG - Kueferstr. 16 - D-59067 Hamm / Germany - Tel. +49 (0)2381/9452-0 - Fax -100 - www.microsens.com
Construction
Gi gab it Sw it c h
MICROSENS
PWR
RM
ALARM
LNK
LNK
LNK
LNK
Reset
ALARM
10/ 100 /100 0B-T
RING
10
9
1
3
5
7
2
4
6
8
1
3
5
7
9
10
2
4
6
8
Fig.: Displays and ports
Installation Options
The Optical Crossbar converter module is intended for the installation into a
MICROSENS modular system. It can be combined with all other converter modules of
the same series freely. The current supply is made from a central power supply via
backplane. Together with the power supply (MS416004 and/or MS416004M -
manageable version) maximally 12 modules can be installed into 3HU chassis
(MS416001M) or up to 20 into 4HU chassis front and back (MS416010M).
Optionally a second power supply (MS416004M) for redundancy can be installed. In this
case 10 modules can be used for MS416001M or 18 for MS416010M. During a partial
assembly the unused slots are covered with blind covers (MS416100). The blind covers
do not belong to the scope of supplied with the modular chassis.
Netzteile MS416004M (redundant)
3HE Chassis MS416001M
Port 1:
10/100/1000Base-T
SFP-Slots
Alarm contact
