5
en
gli
sh
Black only
To connect to your high definition TV:
1
Connect the HD AV Cable connector to the
AV port on the console.
2
Set the switch on the AV port connector to
TV or HDTV. The HDTV position should be
selected if your TV supports high definition
resolutions such as 480p, 720p, 1080i, or
1080p.
3
Connect the red, green, and blue color-
banded video connectors on the HD AV
cable to the corresponding color inputs (Y,
Cb/Pb, Cr/Pr) on your TV. Leave the yellow
color-banded composite video connector
unconnected.
4
Connect the solid color left and right (white
and red) audio connectors on the HD AV
cable to the audio inputs on your TV or
stereo receiver.
5
Select the appropriate video input on your
TV (see “No Picture” under
“Troubleshooting” for further information).
After you’ve set up your console, you can
configure additional console audio settings
and test your connection from the System
area of the Xbox Dashboard. But before doing
so, proceed through the steps in the following
pages for connecting to power, connecting
your controller, and other initial settings.
ConnecttoadigitalaudioSystemwith
theComponentCable
If your system (typically, a receiver or
amplifier) supports digital audio input, you can
connect to digital audio rather than to the
standard left and right audio. Digital audio
should produce higher-quality sound.
To connect to digital audio:
1
Connect your video input as described in
the preceding sections.
2
Connect your digital audio cable (not
included) to the digital audio output on
your AV cable and to the digital audio input
on your receiver.
Summary of Contents for RKH-00001
Page 1: ...English 28 Fran ais 56 Espa ol...
Page 85: ...84...
