14
15
Description ofl Hearing Aid
See Figure 2
1. Ergonomic ear-hook
2. Front microphone
3. Rear microphone
4. Pulsador cambio programas
5. Programming connector
(For use exclusively by the Hearing Aid specialist)
6. Volume Control
7. Battery compartment
8. Serial Number (YY - Year of Manufacturing)
9. Battery 13 PR-48 (*Actual size)
10. Receiver
11. Amplifier
12. Custom earmold
Side Indicator
Blue --> LEFT Side
Red --> RIGHT Side
Ambient Conditions
EN
EN
Safety Instructions
• Swallowing the batteries is harmful. Keep out of reach of children
or people with mental disabilities.
• Consult before using your hearing aids in zones in which electronic
or wireless devices are restricted (aeroplanes, for example).
• Do not under any circumstances use your hearing aids in areas
with medical equipment (X-ray, high-frequency, MRI or shortwave
therapy).
• Do not use the hearing aids in areas exposed to the danger of
explosion or an oxygen-rich atmosphere!
• Stay away from strong electromagnetic fields.
• Persons with pacemakers or magnetic valves should keep their
hearing aids at least 15 cm away; if interference is detected, refer to
the implant manufacturer’s safety instructions. Metal detectors or
alarms may cause interference or create unexpected sounds.
• The Amplex BTE P, BTE HP, II BTE P, 80 PRO BTE P, 80 PRO BTE HP,
800 PRO BTE P and 800 PRO BTE HP hearing aids can generate sound
output levels in excess of 132 dB
SPL.
A hearing health professional should take special care when adapting
this hearing aid, as there may be a risk of damaging the user’s residual
hearing.
WARNING!
• Protect your hearing aids from moisture, heat sources.
• Do not use your hearing aids if you are going to shower, bathe or
spray your hair.
• Do not let your hearing aids to suffer hard impacts.
• Never use a microwave or other heat-emitting devices to dry your
hearing aids
.
OPERATION
TRANSPORT AND
STORAGE
l
Limits Temperature [T (ºC)]
From 0 to 40 °C
From -20 to 60 °C
m
Relative Humidity [RH (%)] From 10 to 95 % (without condensation)
n
Atmospheric pressure
[P (hPa)]
500*
1100*
500*
1100*
*Avoid rapid pressure changes
