SYMPTOM
POSSIBLE CAUSE
SOLUTION
The hearing aid
does not work
Spent battery.
Defective hearing
aid
Replace battery.
Consult your
hearing care
specialist.
Volume too low.
Mould or adapter
blocked or
obstructed
Remove the
obstruction and
clean the adapter
or mould.
Distorted or
unclear sound
Spent battery
Replace battery
TROUBLESHOOTING
Manufacturer's
customer service:
NOTE
For any other problems or queries, please contact your hearing
care specialist or retailer.
helpdesk@microson.es
+34 93 300 58 00
OPERATING
STORAGE AND
TRANSPORT
TEMPERATURE
LIMIT
0 - 40 °C
-20 to 60 °C
HUMIDITY
LIMITATION
10 - 95 % (non-condensing)
32
33
EN
ENVIRONMENTAL CONDITIONS
WARNING!
• Batteries are dangerous if swallowed. Keep
batteries out of the reach of children or mentally
disabled persons.
• Please check before using your hearing aid in areas
with restrictions for electronic or wireless devices
(for example, on airplanes).
• Never use your hearing aids in places where there is
medical equipment (X-ray, high frequency, magnetic
resonance or short-wave therapy treatments).
• Do not use a hearing aid in areas where there is a
risk of explosion or in oxygen-rich environments!
• Stay away from strong electromagnetic fields.
• People with pacemakers or magnetic valves should
maintain their hearing aids at a minimum distance of
15 cm. If you detect any interference, please read the
safety instructions provided by the manufacturer of
the implant. Metal detectors and alarms may cause
interference or unexpected sounds.
• m2 BTE / m2 BTE P hearing aids can generate sound
output levels in excess of 132 dBSPL.
CAUTION!
• Protect your hearing aids against moisture and
sources of heat.
• Do not use your hearing aids while showering,
swimming or spraying your hair.
• Protect your hearing aids from hard knocks.
• Never use a microwave or other heating devices to
dry your hearing aids.
SAFETY INSTRUCTIONS
EN
Summary of Contents for m2 BTE AT
Page 47: ...90 91 NOTAS NOTES NOTAS NOTES ...