miriac SBC-S32V234 User Manual
V 1.0
6/40
© MicroSys Electronics GmbH 2018
2.2
Short Description
The miriac
MPX-S32V234
is a member of the MPX module family,
based on NXP’s
S32V234 vision processing MPU
It targets the
evaluation of the main interfaces of the S32V234 processor
2.3
Ordering Information
The MPX-S32V234 System-on-Module (SoM) is available in the following configu-
rations:
Part No.
Title
Description
854901
miriac MPX-S32V234 SoM
NXP S32V234@1GHz CPU, 2GB
DDR3L, standard temp 0C to +70C
854902
miriac MPX-S32V234 SoM
same as 854901, but with extended
temp -40C to +70C
854903
miriac MPX-S32V234 SoM
same as 854901, except CPU contains
Cryptographic Service Engine
2.4
Board Preparation
■
Make sure the BMD switch, located on the MPX-S32V module, is set properly
in order to select the correct boot source.
For more details see chapter
4.2 Boot Mode Configuration
■
Make sure the GPU switch, located on the MPX-S32V234 module, is set
properly in order to select the correct GPU supply.
For more details see chapter
5.5 Switches
Figure 1: BMD Switch
Figure 2: GPU Switch
