Peripherals 6
miriac SBC-T1024 User Manual
V 2.3
38/70
© MicroSys Electronics GmbH 2017
6.4
PCIe Connections
The SBC-T1024 offers two x1 lanes on the following connectors.
Table 6-5 PCIe SerDes assignment
Basically, the carrierboard offers four x1 lanes on different connectors which may
be available in combination with other MPX2 modules.
6.4.1 Mini-PCIe Slot
There are two mini PCIe slot on the carrierboard.
The first one can hold mPCIe cards only, mSATA is not supported.
Part Reference:
ST8
Manufacturer:
Tyco
Type:
2041119-1
Used with:
Half size mini PCIe
cards are preferred
Broaching nuts for both half and full
size cards are placed on the carrier
board. When full size cards are
used care has to be taken to
choose cards that do not have parts
on the bottom side accidentally
shorting signals.
MicroSys recommends to use half
size cards with this slot only!
Serdes
ST7
(Mini-PCIe /
mSATA Slot)
ST8
(Mini PCIe Slot)
ST9
(PCIe Extension
Connector)
ST11
(PCIe Extension
Connector)
Lane 0
Not available with
the SBC-T1024
Lane 4
✓
Lane 5
✓
Lane 7
Not available with
the SBC-T1024
All manuals and user guides at all-guides.com
