Software 9
miriac SBC-T1024 User Manual
V 2.3
66/70
© MicroSys Electronics GmbH 2017
9
Software
9.1
U-Boot
The SBC-T1024 uses an U-Boot as standard boot loader, which is always
integrated in both the board's NAND and SPI Flash memories on delivery.
Additionally, there’s an U-Boot version available to be placed on microSD card, if
both other boot options should fail for some reason.
Either boot option can be selected by the Boot Device Switch (see chapter 7).
9.2
Operating System Support
MicroSys Electronics GmbH offers Linux and Microware OS-9 RTOS support for
the board.
Other Operating Systems are available on request only.
If you should have ordered a Starter Kit, the most recent Linux will already be
installed in the board's flash, so you can start to develop and test your application
right away.
9.3
Flash Layout
9.3.1 NAND Flash
Start
End
Definition
Size
0x000000
0x0FFFFF
u-boot
1MB
0x100000
0x11FFFF
u-boot env
128KB
0x160000
0x16FFFF
FMAN Ucode
64KB
0x180000
0x18FFFF
QE Firmware
64KB
Table 9-1 NAND Flash Memory Map
9.3.2 SD Card
Block
#
Blocks
Definition
Size
0x008
2048
u-boot
1MB
0x800
0024
u-boot env
8KB
0x820
0256
FMAN Ucode
128KB
0x920
0256
QE Firmware
128KB
Table 9-2 SD Card Memory Map
9.3.3 SPI Flash
Start
End
Definition
Size
0x000000
0x0FFFFF
u-boot
1MB
0x100000
0x101FFF
u-boot env
8KB
0x110000
0x12FFFF
FMAN Ucode
128KB
0x130000
0x14FFFF
QE Firmware
128KB
Table 9-3 SPI Flash Memory Map
All manuals and user guides at all-guides.com
all-guides.com
