19
T
echnical
S
p
ecifications
T
roubleshooting
Product Outline
Use with a
Macintosh
Windows
95/98/NT
Safety
Standards
5. Installation (Windows)
Applicable enviroment
The PCD-47 can be installed in the following environments:
- SCSI board
Adaptec SCSI board (recommended)
- Software driver
Adaptec EZ-SCSI (recommended)
- Operating system
MS-DOS 5.0 or higher
- Windows
Ver. 3.x, Win 95/98, Windows NT
SCSI Card Installation
Follow these directions if you do not yet have a SCSI interface card
installed. Although our reader should work with nearly one hundred
percent of the SCSI interface cards on the market, we highly recom-
mend using one of the Adaptec series. The following instructions were
written for Adaptec cards and may or may not work for other card
types. Refer to the SCSI card manual for details. Technical questions
concerning other SCSI cards should be directed to the SCSI card
manufacturer, not the PC Card reader manufacturer.
1. Shut down the system, and turn off the computer.
2. Unplug all cables connecting to the computer, and remove the case.
3. Install the Adaptec SCSI card into an empty expansion slot.
4. Make sure all connections are secure and re-assemble the computer along
with all the cables.
Windows 95/98 and Windows NT Users
5. Simply power on the machine, and boot to Windows.
6. If windows doesn’t autodetect your SCSI card, then enter the control
panel from the Start->Setup->Control Panel menu, and double-click on
“add new hardware”.
7. Select the “Auto-detect hardware” option and wait for completion.
8. Windows NT users may need to consult the Windows NT manual for
hardware installation.