12
Care and Cleaning
To ensure optimal performance from the your scanner, it is important to clean several critical
parts of the scanner on a regular basis. Please follow the sections below to clean each part
carefully.
NOTE
:
•
The recommended cleaning cycle time would be after approximately 3,000 to 5,000 scans.
•
For more details on cleaning, refer to the scanner’s User’s Manual in the Microtek Software CD/DVD
and see the “Care and Cleaning” section.
Cleaning the Scanner Glass Surfaces
With the scanner lid (ADF) opened, use a soft,
non-abrasive and lint-free cloth to gently wipe
the glass surfaces of the flatbed and ADF of
the scanner.
Cleaning the Sensors
With the ADF cover opened, find 4 sets of
sensors (Ultrasonic Double-feed sensors, I/O
sensors, and Tray sensors), and then clean the
sensors with a dust blower.
Cleaning the Rollers
With the ADF cover opened, find several
groups of rollers, and then clean the rollers
with a lint-free cloth or a swab moistened
with alcohol (ethanol) or water.
Summary of Contents for ArtixScan DI 5230
Page 16: ...16 ...
