Microtek ArtixScan DI 5230, Start Here Manual

 13

Maintenance

After usage for a period of time, the Separation Pad and Feed Rollers may become worn out,

and problems such as document double-feed may occur.  In this case, check either the

Separation Pad or the Feed Roller Assembly, and replace them if needed.

Replacing Separation Pad

With the ADF cover opened, a) press the two arms of the Separation Pad inward with your

fingers; b) then pull it out from its compartment and replace it with new one .

NOTE

:

•

The recommended replacement point for the Separation Pad is approximate after 30,000 scans; for

Feed Roller Assembly is around 150,000 scans.

•

Please contact your local resellers for purchasing new pad and new feed roller.

•

For more details of replacement, refer to the scanner’s User’s Manual in the Microtek Software CD/DVD

and see the “Maintenance” section.

a

a

b

Replacing the Feed Roller Assembly

With the ADF cover opened, a) press the tab on the top of the roller cover with your finger to

pull it out, b) then remove the Feed Roller Assembly from its compartment and replace it with

new one.

Old pad

New pad

New roller

Old roller