Microtek ArtixScan DI 5230, Start Here Manual

2

Unlock Scanner

A.

Remove the yellow “Unlock

 Scanner

”

 sticker from

your scanner.

B.

With the scanner power off, tilt the front right

corner of the scanner to see the locking switch at

the bottom.

C.

Push the locking switch to the position as indicated

in the graph, with the icon on the lock showing as

“Unlocked”.

NOTE

: To lock the scanner (for shipping and other reasons), tilt the scanner and look for the locking switch

on the right corner at the front, then push the locking switch to the "Locked" position.  DO NOT turn the

scanner upside down when attempting to lock the unit.

Unlocked

Locked

Connect Scanner

To the power adapter

A.

Connect the power adapter to the back of the scanner.

B.

Plug one end of the power cord into the power adapter, and plug the other end of the

power cord into a wall outlet or other power source.

To the Hi-Speed USB cable

C.

Connect one end of the cable to your computer.

D.

Connect the other end of the cable to the scanner’s USB  port.

Once the scanner is

powered on, the

green LED will be

lighted up, and the

7-segment LED

display (SSD) will

also be activated as

well.

The system will

detect the scanner

automatically.

C

B

A

D

Power button

located at the

front of the

scanner.

E

E.

Press and hold the Power button

( ) until the orange LED lights on.