3
Connect Scanner
To the power adapter
A.
Connect the power adapter to the back of the scanner.
B.
Plug one end of the power cord into the power adapter, and plug the other end of the
power cord into a wall outlet or other power source.
To the Hi-Speed USB cable
C.
Connect one end of the cable to your computer.
D.
Connect the other end of the cable to the scanner’s USB port.
E.
Press and hold the Power button ( ) until the orange LED lights on. Once the scanner is
powered on, the green LED will be lighted up, and the 7-segment LED display (SSD) will also
be activated as well.
Customize the Function Button
Your scanner is equipped with one Select, one Scan/Stop and one Favorite buttons, plus a LED
display, used to automate a number of customized and predefined operations, such as scanning
to a file, sending an image to your printer, scanning for OCR, etc. Customizing is done through
the
Save Settings to Function Button
command in the ScanWizard DI, refer to the scanner’s
User’s Manual for more details.
•
Select:
Toggle through the numbers of predefined
function buttons (F1 to F5).
•
Scan/Stop:
Start scan immediately or cancel a
ongoing scan job.
•
Favorite:
Carry out the function defined to the
Favorite button directly.
LED display:
Display the selected function
button number.
C
B
A
D
Power button
E
The system will
detect the
scanner
automatically.
