ArtixScan DI 7200S/7280S User's Manual 47
5. Specify the function settings according to your requirements, then click the
Save
button. The parameters currently specified for your selected function
button are saved. To define another custom function button if desired,
follow steps 2 through 5 of this section.
NOTE:
1. When you have finished the settings for the function buttons in the interface,
you have to exit interface before you perform the predefined scanning task
by pressing the function button on the scanner.
2. If ScanWizard DI is launched and the Main interface (AP control panel) is
activated on the screen, the scanned image files will appear in the Thumbnail
View window for your viewing after you perform the scanning task by
pressing the function button on the scanner.
3. There is only one set of operational parameters can be set and memorized for
the Favorite button every time when you customize it through the Scanner
Button Settings interface. You can use it as a hot key to store one set of
operational parameters used most frequently.
How the Scanner Button Works
When you finish customizing the function buttons, follow the steps below to
perform the scanning task by pressing the function button on the scanner. The
scan will be performed in accordance with the designated button function using
the parameters configured in the Scanner Button Settings interface.
1. Load the documents to be scanned onto the scanner's document feed tray.
2. Exit the Scanner Button Settings interface.
3. Press the
Favorite
button on your scanner to activate the function associated
with the Favorite button easily.
or,
Press the
Select
button to toggle through the numbers of predefined function
buttons (F1 to F5). When you see the number you would like to use, press
the
Scan/Stop
button to activate the function associated with that button
easily.
Press the button again to cancel the ongoing scanning task if needed.
4. If necessary, specify new settings for each function button. Follow the
procedures (steps 1 through 5) for the “Customizing the Function Buttons”
section to specify your new requirements for the buttons that you wish to
redefine.