2
Install the Document Feed Tray
Before using the Document Feed Tray with your scanner, you need to install it on the scanner.
Follow the instructions and graphs below to correctly install the Document Feed Tray.
A.
Lift up the Release button in the direction
of the arrow shown to open the scanner
cover.
B.
Install the Document Feed Tray on the
scanner;
a). insert the four flanges (tabs) of the
feed tray into the holes on the
scanner, indicated in the graphic by
blue circles.
b). push down the two flanges (tabs)
located at the rear of feed tray into
another two holes, indicated in the
graphic by red circles.
Make sure the Document Feed Tray snaps
into place and sits tightly on the scanner.
a
b
C.
Close the scanner cover. You would hear
a click sound when the scanner cover
returns to its original position.