NDT-2000 User's Manual 41
Cleaning the Glass Surface on the Digitizer
Due to the glass on the digitizer is indented and located in the groove, you have
to use the forceps come in the cleaning bag as an aide to fix the lint-free cloth to
clean the glass.
Before cleaning the glass, check for the major components included in the
cleaning bag.
When done, follow the steps below to clean the glass surface on the digitizer.
For detail descriptions, refer to the printed document come with the cleaning bag
inside the package.
Forceps (Straight and Serrate)
Lint-free cloth
(Several pieces)
Remove the glass cover
Clean the indented glass
1. Open the front cover of the
digitizer.
2. Locate the glass cover and
remove it from its compartment
part.
3. Loose the the ratchet (snap
lock) of the forceps.
4. Put the lint-free cloth on the
serration of the forceps.
5. Clean the indented glass located
in the groove.
6. Put the glass cover back into its
original position.
Please store the printed document
about how to clean the indented
glass carefully for the use in the
future. .
