4 Microtek ADF-650/651 Installing and Getting Started
Scanning Text Originals for OCR
1. Make sure you have ScanWizard 5 installed on your computer, and do not load
any material at this point.
2. Launch ScanWizard 5 in stand-alone mode.
Specify your own scan settings by clicking on the
Tool
buttons in the Standard
Control Panel (see settings below); or by selecting the appropriate setup items
from the Settings window in the Advanced Control Panel.
a) Click the Original
button, then select
Text Document as
your scan material
type.
b) Click the Scan Type
button, then select
Black & White as
your output image
type.
c) Click the Purpose
button, then select
OCR Text.
Tray Flap
Note:
The ADF-650/651 is not designed for
scanning photos. Doing so may damage
your originals. Microtek accepts no
responsibility for damages that may arise
from misuse of equipment.
Note: When scanning colored text originals, you must select “Photo” and use
either True Color/Web Color (unless B/W is the chosen output).
3. Place the stack of paper to be scanned on the document feed tray.
a) Open the top Tray Flap and load the stack of papers on the feed tray, with the
side to be scanned facing up. Push the paper stack into the tray, until the
edges of the paper touch the feeder rollers.
