6 ScanMaker i2400 Supplement
B5
A4LTR
A4
LTR
B5
Allows you to switch to
the Professional Mode
Allows you to switch to
the Advanced Mode
Allows you to activate the
Preferences window, which
contains selections
for image settings (i.e., file
format, resolution, scan quality)
Press the Scan
button to start
scanning
Minimizes
ScanWizard EZ
Exits ScanWizard EZ
For PC Users Using ScanWizard EZ
A. Scanning Photos (1)
This scenario uses the ScanWizard EZ - EZ Mode.
1. Raise the scanner lid, and place the photo to be
scanned face down on the scanner glass surface.
Position the top end of the photo towards the right
of the scanner, and then lower the scanner lid on
the scanner glass surface.
Note: For the automatic cropping feature to work correctly during the preview
scan of your photo, make sure the scanner lid is completely flat and closed over
the scan bed before you launch ScanWizard EZ.
2. Double-click the ScanWizard EZ icon on your desktop to launch ScanWizard EZ.
When ScanWizard EZ is launched for the first time, the control panel of
ScanWizard EZ - EZ Mode appears on the screen automatically.
3. Click the Scan button to start scanning.
The ScanWizard EZ will detect the photo on the scanner glass surface first, next
automatically calibrate the scanner, crop the image, and perform the image scan
with factory settings. When done, the output image can be saved in a file and
delivered to the specified location.
