6
Scanning Film
1. Place the film.
To scan film, use the LightLid 35 III, as detailed in the “Using the LightLid 35 III”
section in this guide.
2. Launch
ScanWizard EZ
.
Follow the step 2 in “Scanning Photos” on previous page to launch ScanWizard EZ.
3. Switch to ScanWizard EZ - Professional Mode.
Click the
Professional Mode
button on the control panel of the EZ Mode to switch to
the Professional Mode.
4. In the Preview window of the Professional Mode, click the
Scan Material
button to
choose
Negative Film
for negatives; choose
Positive Film
for transparencies and slides,
depending on the film type you are using.
5. Select the
Scan Frame
tool, and choose the area to be scanned by sizing the marquee
around the targeted area.
6. Click the
Overview
button to perform a preliminary scan of the film loaded onto the
scanner.
7. Specify your scanning requirements in the Settings window. Choose the desired image
type and resolution, and adjust the scan frame settings if necessary.
8. Adjust image quality if necessary, using the Advanced Image Correction tools.
9. Click the
Scan to
button in the Preview window to scan the film.
Scan Job Queue
window
Press to switch to
ScanWizard EZ - EZ Mode
Preview window
Settings window
Press to switch to
ScanWizard EZ - Advanced
Mode
Click
NEW
to create
more scan frames
Scanning Film with the LightLid 35 III (cont.)