6
Scanning Film
1. Place the film.
To scan film, use the film holder. Refer to “Using the TMA” in this guide for more details.
2. Launch ScanWizard EZ.
Follow the step 2 in “Scanning Photos” on previous page to launch ScanWizard EZ.
3. Swtich to ScanWizard EZ - Professional Mode.
Click the
Professional Mode
button on the control panel of the EZ Mode to switch to the
Professional Mode.
4. In the Preview window of the Professional Mode, click the
Scan Material
button to choose
Negative Film
for negatives; choose
Positive Film
for transparencies and slides, depending on the
film type you are using.
5. In the Scan Job Queue window, check the “Multiple Auto-crop for EZ Lock Film Holder” option.
6. Click the
Overview
button to auto-crop and perform a preliminary scan of the film loaded onto the
scanner.
7. Specify your scanning requirements in the Settings window. Choose the desired image type and
resolution, and adjust the scan frame settings if necessary.
8. Adjust image quality if necessary, using the Advanced Image Correction tools.
9. Click the
Scan to
button in the Preview window to scan the film.
Preview window
Settings window
Scan Job Queue window
Press to swtich to
ScanWizard EZ - EZ Mode
Press to swtich to
ScanWizard EZ - Advanced
Mode