background image

10     ScanMaker s480/s380 Supplement

A. Scanning 35mm Filmstrips

To scan 35mm filmstrips, use the 35mm filmstrip holder, which can simultaneously
hold three strips of 6 frames each, or a total of 18 frames.

1. Load the filmstrip face down inside the holder. Slide the filmstrip along the slots of

the holder until the filmstrip is fully loaded.

2. Raise the scanner lid, then place the film holder with the film on the scan bed. The

holder should be positioned against the top ruler of the scanner., with the
calibration window facing toward the back of the scanner.

3. Gently lower the scanner lid down onto the scan bed; the lid should be able to

close completely.

4. Double-click the ScanWizard 5 icon (

) on your desktop to launch the

ScanWizard 5 Standard Control Panel, then click the Switch icon (

) on the right

corner of the Standard Control Panel to switch to the Advanced Control Panel.

The 

calibration

window

 on the glass

surface should be
kept clear and free
from any obstruction
during scanning

To make sure the auto multiframe
cropping feature performs correctly,
align the holder’s front edge against the
top ruler of the scanner.

Note that the arrow marks on both the
film holder and scanner's top ruler are
pointing to each other.

Summary of Contents for ScanMaker s380

















Reviews: