2
To the power adapter
A.
Remove the yellow “Step 4” sticker
from your scanner.
B.
Connect the power adapter to the back
of the scanner.
C.
Plug one end of the power cord into the
power adapter, and plug the other end
of the power cord into a wall outlet or
other power source.
Unlocked
A.
Remove the yellow “Step 3” sticker from your
scanner.
B.
With the scanner power off, tilt the front right corner
of the scanner to see the locking screw at the bottom.
C.
Using a screwdriver, push and turn the locking screw
counterclockwise to the unlock position. When
successfully unlocked, the screw will push out a little,
protruding slightly from the bottom of the scanner.
NOTE
: To lock the scanner (for shipping and other reasons), refer
to the XT6060 User’s Manual.
Unlock Scanner
Connect Scanner
B
C
D
E
To the Hi-Speed USB cable
D.
Connect one end of the cable to your
computer.
E.
Connect the other end of the cable to
the scanner.
F.
Press the power switch at the back of
your scanner, and wait for the indicator
light on the front panel to stop blinking
and stay on steady.
The system will detect your scanner
automatically.
Power switch
F
