Chapter 2 Setting Up Your FPD Touch Monitor
31
Installing the Touchscreen Driver
TouchWare includes the software driver that lets your touchscreen
work with your computer. You must be sure to install the correct
touchscreen driver for your operating system. MicroTouch has
touchscreen drivers for the following PC operating systems:
•
Windows 95 and Windows NT 4.0
•
Windows NT 3.51
•
Windows 3.1x
•
MS-DOS
•
OS/2 System 3.x and 4.x
The procedure for installing TouchWare from the CD is different for
each operating system. Refer to the appropriate section for your
operating system.
Note:
After you install TouchWare, be sure to restart your computer
to load and activate the touchscreen driver.
Installing TouchWare for Windows 95 or Windows NT 4.0
If the AutoStart feature for your CD-ROM drive is active:
1.
Insert the TouchWare CD into the CD-ROM drive.
The system automatically detects the CD and runs the Setup
program.
2.
Follow the on-screen instructions to complete the installation.
After the software is installed, restart your computer to load and
activate the touchscreen driver. To complete the setup of your
touch monitor, make sure you calibrate the touchscreen.
