Chapter 4 Guidelines for Integrating Your FPD Touch Monitor
53
Mounting the Profile Monitor to a Wall
To mount the Profile monitor to a wall, you need the following
supplies:
•
Two mounting fixtures (screws or nails). The fixture head must fit
into the two notches on the back of the monitor. Additionally, the
fixture must support the weight of your monitor and the hanging
cables.
•
Tools: Phillips-head screwdriver, hammer, and drill.
¾
To mount the Profile monitor to a wall:
1.
Place the monitor face down on a scratch-resistant surface.
2.
Remove the base from the monitor.
•
Remove the two screws from the covers. Remove the two
covers.
•
Remove the four screws holding the base to the monitor. The
base and the monitor will separate.
•
Store the two covers, screws, and base in a safe location in
case you want to use them in the future.
