Microtronics Access 1000 Quick Start Manual Download | Manualshive

Page: 16 / 20

background image

Microtronix Access Serial-TCP/IP Converter

4 Cables

4.1 Synchronous Cables – WAN interface

When configured for sync, the DB25F WAN ports have an RS530 DCE pin configuration (compatible
with ISO 2110). RS232 is a subset of RS530, so a WAN port has a standard RS232 pin assignment
when configured for RS232 (V.24).

4.1.1 Connecting to a DCE device

The following cables are used when connecting to DCE device (like a modem) with a female connector
that is supplying clocking on the DCE transmit and receive clock pins.

Crossover cable part numbers

W4025V24DTE

DB25MDB25M RS232 /V.24 crossover cable

W4025V35DTE

DB25MM34M V.35 crossover cable

W4025X21DTE

DB25MDB15M X.21 crossover cable

W4025RS449DTE

DB25MDB37M RS449/V.36 crossover cable

W4025RS530DTE

DB25MDB25M RS530 crossover cable

4.1.2 Connecting to a DTE device

The following cables are used when connecting to DTE device with a male connector that expects to
receive clocking on the DCE transmit and receive clock pins. If replacing a modem, avoid any modem
handshake issues by configuring the device's interface for “leased line” or “permanent modem” type
connection.

Straight through cable part numbers

811SC6MF

DB25MF RS232/V.24 straight through cable

W4025V35DCE

DB25MM34F V.35 straight through cable

W4025X21DCE

DB25MDB15F X.21 straight through cable

W4025RS449DCE

DB25MDB37F RS449/V.36 straight through cable

W4025RS530DCE

DB25MDB25F RS530 straight through cable

www.microtronix.com

16

«
...
14
15
16
17
18
...
»

Summary of Contents for Access 1000





















Reviews:

No comments

Related manuals for Access 1000

MediaLounge DSM-520

Brand: D-Link Pages: 127

DivX Connected DSM-330

Brand: D-Link Pages: 38

Brand: Daewoo Pages: 36

Atlona Omega AT-OME-SR21

Brand: Panduit Pages: 28

Brand: ORO Pages: 18

Brand: Clearline Pages: 4

Brand: Patton electronics Pages: 16

Brand: All-Power Pages: 35

Brand: Harman Kardon Pages: 16

OSD2166M Series

Brand: Optical Systems Design Pages: 16

Basys Controls QD1010b

Brand: TCS Pages: 5

Brand: Votek Pages: 33

NMP-600 - Network Media Player Connects

Brand: ViewSonic Pages: 2

Brand: GIESELER Pages: 4

Brand: Power Bright Pages: 28

PerfectPower PP150

Brand: Waeco Pages: 44

Brand: TDK-Lambda Pages: 36

Brand: IBA Pages: 34

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands