Important note: The use of spare and wear parts (e.g. accu or battery packs, etc.) that are not
approved by the manufacturer will render the warranty invalid.
Note: Ensure that accu and battery packs are disposed of in line with environmental require-
ments. Used accu or battery packs can be returned to the manufacturer or handed in at suit-
able collection points.
11.3.2 Replacing the accu cover
The optional "myDatanet service kit (206.324 )" equipment is required for replacing the accu cover.
Important note:
l
The accu cover must be replaced if impurities on the seal of the accu cover cannot be
removed without damaging the seal.
l
The accu cover must definitely be replaced in the event of noticeable deformations of
the seal or the accu cover.
l
The manufacturer must be contacted if there is any indication of moisture within the
sealing area (see "Contact information" on page 145).
l
The accu cover must generally be replaced on devices supplied before April 2009.
l
The maximum permissible torque for all of the screws is 0.4 Nm and must not be
exceeded under any circumstances!
Replacing the accu cover - step 1
Replacing the accu cover - step 2
1 Screw
3 Accu electronics
2 Accu cover
4 Screw including shoulder washer
116
Rev. 01
