Note: Additional explanation on universal inputs that are operated in digital or digital LP mode.
Measurement channels ->
Basis
Mode
digital
Measurement channels -
>Config.
Filter time
800ms
Input signal
Input signal at the universal input
Input signal after filter
Input signal taking the "filter time" into consideration
Logic level
The input signal at the universal input is analysed once per second.
Filter module to compensate for brief signal fluctuations
disabled ("filter time" = 0)
Filter module to compensate for brief signal fluctuations
active ("filter time" not equal to 0)
Explanation: To react to a level change at the universal inputs as quickly as possible, the module chain detailed in
"Diagram of the internal processing of the measurement values" on page 25 (with exception of the control
module) for the relevant universal input is operated once per second in digital or digital LP operating mode. This
ensures that alarms and triggers are detected asynchronously to the measurement cycle. The signal must be
present for at least 1 second to definitely detect a pulse safely. Additionally, any brief faults can be eliminated
with the help of the "filter time".
26
Rev. 06
Summary of Contents for myDatalogEASYplus
