24
To adjust the time of day that the flush cycles will occur, touch “regen. time” and two blue
arrows will appear. Touch the arrow on the left to adjust to an earlier time, and the arrow on
the right to adjust to a later time.
When you are satisfied that all of the settings are correct, press the CHECKMARK ICON in the
bottom right corner of the screen. To cancel your changes and return to the home screen,
press the “X” ICON at any time.
Touch Screen Display Brightness
You can adjust the brightness of your touch screen by touching the BRIGHTNESS ICON.
The brightness can be set on a scale from 0 to 10 with 10 being the brightest. The default
setting is 10. To change the setting, touch “power,” then use the 2 blue arrows to increase or
decrease the brightness to suit your preferences. Each time you press one of the blue
arrows, the screen brightness will change accordingly.
When you are satisfied with the brightness level, press the CHECKMARK ICON in the bottom
right corner of the screen. To cancel your changes and return to the home screen, press the
“X” ICON at any time.
Master Settings
The Master Settings Mode allows service technicians to set-up the valve for optimal
performance. A password is required to enter this mode. We do not recommend that you
alter any of these settings. See Master Settings Mode below.
DIAGNOSTICS
The Diagnostics Mode allows you to view a wide range of information about the
performance of your system and your water usage. You can enter the Diagnostics Mode by
selecting the DIAGNOSTICS ICON in the main menu on the home screen.
Once in the Diagnostic Mode, you can navigate to the next screen by pressing the right
arrow on the top right corner of the screen or go back to the previous screen by pressing the
left arrow on the top left of the screen. You can return to the home screen at any time by
pressing the HOME ICON on the bottom right corner of the screen.
