25
The first screen displays the following diagnostic information:
Flow Rate:
This is the current flow rate of water through the system in gallons per minute. If
water is not running, it will display 0.0 GPM.
Peak Flow:
This is the highest flow rate in gallons per minute recorded through the system
since measurement was last reset. To obtain more details, touch “peak flow” and it will
display the date and time at which this peak flow rate occurred. To reset the peak flow
meter, select the icon in the bottom right corner of this screen. The peak flow rate meter will
be reset to zero. To return to the main diagnostics screen without resetting the meter, press
the diagnostics icon instead.
Totalizer:
This is the total volume of water in gallons (U.S.) that have been treated by the
system since the totalizer meter was last reset. To reset the totalizer meter, touch “totalizer”
and then select the icon in the bottom right corner of the next screen. The totalizer meter will
be reset to zero.
The second screen displays when the last regeneration (flush cycle) occurred as well as the
software version that is used by your control valve.
The third screen indicates the number of flush cycles that the valve has done as well as the
average interval between regenerations (flushes) based on the last 4 cycles.
Daily Usage:
In this area, you can access daily water usage information for the past month.
The first screen allows you to see the average water usage by day of the week (use the >
and < icons to view other days of the week). Select a day of the week to see detailed water
consumption data on this day of the week for the last month.
The final Diagnostic Mode screen provides details as to how much water has been
processed since the last flush cycle and when the programming settings were last changed.
To exit the Diagnostics Mode, press the home icon in the bottom right corner of the screen.
