MDS 05-2806A01, Rev. E.1
MDS iNET 900 Series User’s Guide
79
Access Point. (
See “Device Information” on Page 38
for SNTP server
identification.) The manually set time and date clock is dependent on the
unit’s primary power. A loss of power will reset the clock to January 1,
2002 but will not affect previously stored error events.
Figure 3-41. Event Log Menu
•
Current Alarms
(Telnet/Terminal only)
—View list of root causes that
have placed the Device Status in the alarmed state. (
See “Alarm
Conditions” on Page 118
)
•
View Log
—View a list of events stored in the current log. Some
of these events are stored in volatile memory and will be erased
with a loss of power. The events are numbered for easier iden-
tification and navigation.
•
Clear Log
—Purges the log of all events
TIP:
Save your Event Log before choosing to clear it in order
to retain potentially valuable troubleshooting information.
(
See “Upgrading the Firmware” on Page 93
for an over-
view on how to transfer files from the transceiver to a com-
puter on the network using TFTP.)
•
Send Log
(Telnet/Terminal only)
—Initiate TFTP transfer of the
unit’s event Event Log in a plain text (ASCII) file to a TFTP
server at the remote location.
•
TFTP Host Address
(Telnet/Terminal only)
—IP address of the com-
puter on which the TFTP server resides. This same IP address is
used in other screens/functions (reprogramming, logging, etc.).
Changing it here also changes it for other screens/functions.
[
Any valid IP address; 127.0.0.1
]
Summary of Contents for iNET 900 Series
