6
2.3)
To activate the MicroPLB
TM
with
Attached/Internal GPS receiver:
1) Remove cover
Hold away from Face
Antenna will automatically deploy
2) Pull activator pin
completely out.
Blinking Green = Transmission
Single Blink = GPS NOT Acquired
Double Blink = GPS Acquired
Single Red Blink prior to
each 406 MHz Pulse.
3) Place beacon in a clear area.
Both antennas pointing up
(GPS “Bulls-eye” and spring)
For best GPS operation, keep beacon
away from obstructions such as tall
buildings, trees, etc.
Use the MicroPLB
TM
only during situations of grave and imminent danger.
Operation under any other circumstances may lead to sanctions and/or penalties.