4 |
Product control by the user
PRODUCT CONTROL BY THE USER
−
Rotary wheels with confirmation function (when pressing)
The control unit has got the following control elements
−
Display unit
−
Air temperature
In a basic status the unit displays:
−
Set requested relative air humidity
−
Measured relative air humidity
−
Actual date and accurate time display in the bottom line
−
Displaying the following informational icons in the upper line: radio signal presence,
dehumidification, heating, defrosting, device failure, battery change indicating icon
SETTING OF THE REQUESTED HUMIDITY
Set the requested humidity by wheel revolution. The set value can be monitored on the display.
During the setting the lighting is switched on for a certain time. It is also possible to turn on the
lighting for monitoring the measured values, by pushing the wheel. This does not need any
setting changes. The lighting function is activated only in case of permitting it in the device´s
settings.
SETTING OF THE REQUESTED TEMPERATURE
Press the wheel in the requested humidity display mode. The lighting will turn on. During a time
period of the lighting press the wheel one more time. (In case the lighting function is not
permitted on your device, press the wheel only once.)
The requested temperature is shown down, on the left part of the display. Set the requested
temperature by wheel revolution. The set value can be monitored on the display. During the
setting the lighting is on for a certain time. It is also possible to turn on the lighting for monitoring
the measured values, by pushing the wheel. This does not need any setting changes. The
lighting function is activated only in case of permitting it in the device´s settings.
