34 |
U s e r ´ s a n d i n s t a l l a t i o n m a n u a l
D R Y S I R E N
P a g e 3 4 o f 6 8
V e r s i o n : 0 1 / 2 0 1 8
SW
IM
M
IN
G
P
O
O
L
D
EH
U
M
ID
IF
IE
R
DR
Y
S
IR
E
N
8.
INSTALLATION
–
ELECTRICAL CONNECTION
Connection of the unit onto the mains must conform to relevant safety standards valid in your
country.
Main power connection is lead to Compressor unit. Compressor unit then powers the ceiling unit.
Connection requirements: Power supply: 220-240V / 50Hz. Protection: 16A, type C, by a
protective switch (RCD) with nominal differential drop-out current not exceeding 30 mA.
Main power supply cable: 2.5mm2 CYSY, three core – Live, Neutral, Earth.
The main circuit breaker switch of the compressor unit must be situated outside of the swimming
pool hall. The main switch of the unit must be bipolar, with switch-out breaking of conductors L and
N. An appliance for disconnecting the unit from the mains must be embedded into a firm surface.
The distance of contacts, when switched off, must be at least 3 mm for all poles.
In order to protect the unit from weather anomalies it is recommended to install power surge
protection class 1. B+C+D.
2.
Mount the compressor onto the wall console. Please refer to below drawings. All nuts and
screws are supplied.
Nut M8
300mm
The connection of the appliance to the electric mains must be carried out by a
certified electrician.
max. +/-0.3%.
