54 |
U s e r ´ s a n d i n s t a l l a t i o n m a n u a l
D R Y S I R E N
P a g e 5 4 o f 6 8
V e r s i o n : 0 1 / 2 0 1 8
SW
IM
M
IN
G
P
O
O
L
D
EH
U
M
ID
IF
IE
R
DR
Y
S
IR
E
N
12.
MOBILE APPLICATION - INSTRUCTIONS FOR USE
12.1
Control
DRY SIREN is controlled by an Android DRY SIREN application over WIFI. When DRY SIREN is plugged
into the mains and is correctly installed, it will turn on and work on factory preset settings. The unit
will operate to achieve 60% relative humidity with auto light and mic. Bluetooth speaker
will be also activated. Control over WIFI and mobile application allows the user to take over full
control of the unit, dehumidification process, LED lamp, mic and Bluetooth speaker.
Do not run the unit without required amount of refrigerant. Before you proceed
make sure that all installation (electrical, refrigerant, etc.) According to this user’s
manual had been done correctly and in full compliance to this user’s manual.
Description of the home screen
mic
indication of
current humidity
Current humidity
Current air
temperature
DRY SIREN serial
number
Status of the DRY SIREN
-
Connected
-
DS unreachable
-
DS error
-
Pair again
If water drops are
shown, DRY SIREN
is in the process of
dehumidifying
Humidity control
Lamp control
Speaker control
Application
settings