62 |
U s e r ´ s a n d i n s t a l l a t i o n m a n u a l
D R Y S I R E N
P a g e 6 2 o f 6 8
V e r s i o n : 0 1 / 2 0 1 8
SW
IM
M
IN
G
P
O
O
L
D
EH
U
M
ID
IF
IE
R
DR
Y
S
IR
E
N
3. Make sure you are not in DEMO
Application. DEMO application by ‘TRY ME’.
4. Make sure your DRY SIREN is connected to
mains. You can check this by a circuit breaker.
Also at ceiling unit you should hear the fan
running. Please note that the fan is extremely
quiet at normal operations.
5. Alternatively restart your WIFI router.
DRY SIREN does
not start
although
connection
seems OK.
The heat pump is not
connected to the mains
or does not have power
supply or circuit
breaker is off.
Check the heat pump’s connection to the
mains and circuit breaker. Check order of the
phases.
DRY SIREN does
not seem to
work. I have
condensation on
windows, humid
air, etc.
Desired humidity
equals current.
Everything is OK. It is normal that DRY SIREN
does not operate because it has reached
requested humidity level. If you feel that the
air is humid or you have condensation,
decrease the requested level of humidity.
DRY SIREN does not
work for 3 minutes and
then it starts.
This is normal. It is time protection for
compressor.
DRY SIREN operates too
short
Please allow DRY SIREN to run 24 hours and
then check the humidity again.
DRY SIREN is not
connected to the mains
or does not have power
supply or circuit
breaker is off.
Check the DRY SIREN’s connection to the
mains and circuit breaker.
DRY SIREN has a
technical problem. In
such case error
message ‘DS ERROR’ is
shown in application.
Call for service.
Refrigerant leak, not
enough refrigerant,
restriction or other
problem on refrigerant
connection.
Check the refrigerant connection and amount
of refrigerant. Call for service.
DRY SIREN works
but the air is
humid, there is
condensation on
windows, etc.
The pool size is too big
for DRY SIREN.
Speak with your distributor or reseller and
double check the correct capacity for your
pool.
