MC350 User Manual V2.0
http://www.mictrack.com
5
Set vibration sensitivity: vibtime123456,T
Example : vibtime,10
Reply : vibtime set ok
Note: T is [1-15] seconds.
7.8 Geo-fence
Setup via Mobile App or PC Web Server
7.9 Over speed Alarm
Command:speed+pspace+X
Example: speed123456 100
Reply: Speed ok
Close command: speed123456 0
Note: 1. X is speed benchmark value, which is an integral number. unit is KM/H definition
domain of [0, 999].
2. Device will call and send alarm message to three Center phone number.
7.10 Low Battery Alarm
While device detect internal battery is low power, it will send message “Your tracker is
low power, please recharge it” to Center Number .
7.11 Working Mode
7.10.1 Normal mode : nmod,password
Example : nmod,123456
Reply
:
OK
Note: In this mode the device and real time tracking and GPS and TCP keep connected.
Set Normal mode interval time : FREQ,123456,T
Example : FREQ,123456,20
Reply : OK
Note: T is [10,3599] seconds
7.10. 2 Auto mode: tmod,password, T
Example : tmod,123456,5
Reply
:
OK
Note: Device will report as the interval time, after that device will go to sleep(GPS/TCP
close).
T is [5,720] minutes.
7.10.3 Power saving mode: smod,password
Example: smod,123456
Note: if detect to vibrate device will wake-up and report to server every 10 seconds, or it