background image

Printed in USA

8471 91

ISO

9001

 C

O MPAN

Y

R

E

G

IS T ER

E

D

!

MADE

 in the 

USA

Keep for your records

Model Number

Serial Number

Installation Date

Purchased from - Name:

Address

City, State, Zip

TO VALIDATE WARRANTY:

FILL OUT THE FORM ON THE LAST PAGES AND RETURN TO MIDCO INTERNATIONAL

Warranty

14

MADE

 in the 

USA

As an ISO 9001:certifi ed company, we proudly design, manufacture and assemble our products in Chicago, Illinois, USA.

Midco

®

 International Inc. - 

4140 West Victoria Street - Chicago, Illinois 60646 - toll free: 866 705 05148478

tel:  773.604.8700 - fax: 866.580.8700 - web: 

www.midcointernational.com

 - e-mail: 

sales@midcointernational.com

Warranty

Midco

®

 International Inc Limited Warranty Policy 

Exclusions Terms, Customer Requirements and Instructions

Products manufactured by Midco International Inc. (hereinafter Midco) are guaranteed to be free from defects in workmanship and 
materials, under normal use and service, 

for a period of twelve (12) months from the date of installation, or 18 months from 

date of manufacture or whichever occurs fi rst.

If a part is defective due to workmanship or materials and the part is removed from the product within the applicable warranty period 
and returned to Midco in accordance with the procedure described below, Midco will at its option either repair or replace the part. 
This warranty extends only to persons or organizations who purchase products for resale. The warranty does not cover labor and/
or freight.

The  expressed  warranty  above  constitutes  the  entire  warranty  of  Midco  with  respect  to  the  products  in  its  publications  and  is 
IN  LIEU  OF ALL  OTHER  WARRANTIES,  EXPRESSED  OR  IMPLIED,  INCLUDING ANY  WARRANTY  OF  MERCHANTABILITY 
OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MIDCO BE RESPONSIBLE FOR ANY 
CONSEQUENTIAL DAMAGES OF ANY NATURE WHATSOEVER.

Instructions for returned goods are as follows: 

The following will apply to the return of any products to Midco International Inc. 

under this warranty:

Parts must be:

a.  Identifi ed with Midco’s *Return Authorization Number -(RAN) 
*(Available only directly from Midco. Contact Customer Service 
to obtain a tag.)
b.  Protected from shipping damage.
c.  Received transportation pre-paid at:
      Midco International Inc.
      Return Goods Dept.
      4140 West Victoria Street
      Chicago, Illinois 60646-6727
d.  Found by Midco’s inspection to be defective in workmanship 
or materials under normal use and service.
e.  Handled  in  accordance  with  one  of  the  two  following 
procedures, as specifi ed by the customer making the return:
  1. 

Credit  Procedure.

  If  replacement  part  was  purchased 

from Midco, credit will be issued at the net price in eff ect at the 
time  of  purchase  with  presentation  of  Midco’s  invoice  number 
and date.
  2. 

Repair  or  Replacement  Procedure.

  Midco  will,  at 

its  option,  either  repair  or  replace  the  part  free  of  charge  and 
return it or its replacement lowest cost transportation pre-paid. 
The replacement will be, at Midco’s option, either a functionally 
equivalent new or replacement product. Premium transportation 
will be used at customer’s request and expense.
 

Note:  All  Midco  burners  have  a  specifi cation  plate  showing 
Model,  Bill  of  Material  and  Serial  No./Date  Code  numbers. All 
three (3) numbers must be shown on your Midco Return Goods 
Tag.  The  Serial  No./Date  Code  is  necessary  to  determine 
Warranty  coverage.  For  example:  2898  indicates  that  the  unit 
was manufactured in the 28th week of 1998. If the Date Code 
is  beyond  the  Warranty  period,  a  receipt  or  invoice  showing 
purchase, delivery or installation date is required.

Final  disposition  of  any  warranty  claim  will  be 
determined solely by Midco.

 If an inspection by Midco 

does  not  disclose  any  defect  covered  by  this  warranty,  the 
product  will  be  returned,  scrapped,  repaired,  or  replaced  as 
instructed by the customer. Products returned to the customer 
will be sent shipping charges collect.

If you have any questions relative to product returns to Midco, 
call, write or e-mail:
      Midco International Inc.
      Warranty Returns/Customer Service Manager
      4140 West Victoria Street
      Chicago, Illinois 60646-6727
      tel 773.604.8700
      fax 773.604.4070
      email returns@midcointernational.com
      web www.midcointernational.com 

Call the factory for Instructions on returned goods. No equipment may be returned without written authorization from MIDCO. 
Returned goods must be shipped prepaid to the factory.

 

 

WARNING: Improper installation and use of this product could result in personal or property injury.

319

Summary of Contents for LNB 1000 Series

















Reviews: